Anyone who has ever owned a laptop or other electronic device knows that whatever you do, you should not let it come into contact with water, especially a large quantity of it. With laptops, water is usually spilled on the keyboard due to the misplacement of a drink or by knocking it over. The problem is not with the water itself, but with the electricity running through the device at the time the liquid is spilled. It is the combination of the two that does the damage to the motherboard, not the simple act of spilling water on it. During the manufacturing process, circuit boards like this are washed in clean water to remove anything from their surfaces before they are packaged and shipped. However, if you need to clean off your motherboard on your desktop or your laptop due to a collection of dust or spilling anything, you should use rubbing alcohol, not water.
As with your response to water coming into contact with any electronic device, it should be immediate.
As soon as it happens, you should turn the laptop upside down, remove the A/C cord, and remove the battery. Turning the laptop upside down serves to let the excess liquid drain out of it and you should do this until it stops dripping out. Proceed to dry off the outside of the laptop with a cloth or paper towels after this.
As long as you disconnect the power source as soon as possible and allow the device to dry out completely, it should be fine. Do not try to power on the device before you are certain that it is completely dry on the inside. Of course, this is only if you have only spilled water on it, not if you have spilled an acidic beverage such as cola or coffee onto it. This will require some extra steps to take care of and may require that you take the laptop apart.
If you think you may have to have it taken apart to clean the cola or coffee off of the circuit board on the inside, then you may want to consider having it taken to a computer repair shop. It will cost a little money, but unless you are familiar with electronics and really feel that you know what you are doing, this is your best option. They will make sure that your laptop is in working order, as long as you made sure that the liquid did not assist in frying the motherboard.
Showing posts with label restoration. Show all posts
Showing posts with label restoration. Show all posts
Friday, January 18, 2008
Checking Out Your House For Mold
Checking your home for mold is something that every homeowner should do if they want to protect their investment and the health of their family, since mold has been known to cause health problems for hundreds, if not thousands of years. Breathing problems and numerous different types of infections have arisen from breathing in or coming into contact with mold and its spores, not to mention the allergic reactions that some people have. Around one third of the population is allergic to mold, but most people do not realize that even dead mold spores can cause allergic reactions.
There are a number of reasons that you should check for mold in your home and signs that should tell you where to check. Any room that has a large amount of water going in and out of it every day should be considered at risk for mold growth and while this usually includes the bathroom, kitchen, and laundry room, it can also include the basement.
The basement should be considered for another reason: it is underground. Humidity builds up easily in basements, especially those that have not been properly waterproofed. Water can leak into this room from the outside of the house, but it can also leak in from cracks in the concrete formed by ground water. If you have any plans on finishing your basement with drywall, you should get the water issues in the basement solved as thoroughly as you can.
The floor of your bathroom and kitchen should also be completely waterproofed. You can install any kind of flooring that you like (although hardwood is not recommended) as long as it is sealed so that water does not get underneath and soak into the floor boards. This can rot the floor over time and cause it to fall right out from underneath you, but before that happens, mold growth is very common.
Mold has also been known to grow on bathroom and kitchen ceilings and walls because the steam has nowhere to go. Both of these rooms should have exhaust vents that will pull the steam out of the room. If not, it becomes absorbed by the ceiling and upper walls and will cause mold growth.
Another problem occurs when people put carpet in moist areas of their home. While most people do not put carpet in the kitchen, some have been known to put carpet in the bathroom. Since water is dripped onto the floor almost every single day in the bathroom, this is one of the worst bathroom remodeling ideas going. No matter how careful you care, mold will eventually start to grow underneath this carpet and you will have to throw it out.
There are a number of reasons that you should check for mold in your home and signs that should tell you where to check. Any room that has a large amount of water going in and out of it every day should be considered at risk for mold growth and while this usually includes the bathroom, kitchen, and laundry room, it can also include the basement.
The basement should be considered for another reason: it is underground. Humidity builds up easily in basements, especially those that have not been properly waterproofed. Water can leak into this room from the outside of the house, but it can also leak in from cracks in the concrete formed by ground water. If you have any plans on finishing your basement with drywall, you should get the water issues in the basement solved as thoroughly as you can.
The floor of your bathroom and kitchen should also be completely waterproofed. You can install any kind of flooring that you like (although hardwood is not recommended) as long as it is sealed so that water does not get underneath and soak into the floor boards. This can rot the floor over time and cause it to fall right out from underneath you, but before that happens, mold growth is very common.
Mold has also been known to grow on bathroom and kitchen ceilings and walls because the steam has nowhere to go. Both of these rooms should have exhaust vents that will pull the steam out of the room. If not, it becomes absorbed by the ceiling and upper walls and will cause mold growth.
Another problem occurs when people put carpet in moist areas of their home. While most people do not put carpet in the kitchen, some have been known to put carpet in the bathroom. Since water is dripped onto the floor almost every single day in the bathroom, this is one of the worst bathroom remodeling ideas going. No matter how careful you care, mold will eventually start to grow underneath this carpet and you will have to throw it out.
Wet Basements and Mold
Those of us who have basements in our homes see it as either a curse or a blessing, depending on the condition of it. You can leave the drywall and carpet out of the basement and use it for storage like many homeowners do or you can put it in and use it for an extra bedroom, family room, or an area to entertain guests. The bad thing about using the basement sometimes, though, is that if it is not properly waterproofed, you can have some moisture and humidity issues to deal with later on if you are not dealing with them already. No one wants to stay in a humid, smelly basement for long and this will turn off any guests that you might want to have over in that area.
Take care of any indoor water issues first. This can include bursting water pipes, hot water heater (that really should be in the basement and nowhere else) or if you use a portion of the basement as a laundry room, it can be a malfunctioning clothes washer. Make sure that your dryer has a vent so that the excess humidity will be directed to the outside of the house. It is also a good idea to never hang clothes up to dry in the basement, unless it is just a single article or two. Water evaporates from the clothing and settles into the air, creating humidity. Clothes should also be dried in the electric dryer as soon as they are done washing to help reduce this problem.
Another thing you should do, especially if you use the basement for a laundry room or if you have an extra bathroom in it, is install an exhaust vent. You can do this in more than one spot if you need to, depending on the size of your basement. This will displace some of the humidity to the outside of the house and not allow it to be soaked up by the ceiling.
Another thing to worry about when you have a humid basement is mold. Mold loves to grow on any dead organic material and once it starts growing, you will be hard pressed to get rid of it without removing the source of the water first. If you have water issues in the basement, make sure these are taken care of before putting any carpet down, since carpet that becomes molded is hard to clean and any padding underneath it that becomes contaminated will have to be torn up and thrown away.
Take care of any indoor water issues first. This can include bursting water pipes, hot water heater (that really should be in the basement and nowhere else) or if you use a portion of the basement as a laundry room, it can be a malfunctioning clothes washer. Make sure that your dryer has a vent so that the excess humidity will be directed to the outside of the house. It is also a good idea to never hang clothes up to dry in the basement, unless it is just a single article or two. Water evaporates from the clothing and settles into the air, creating humidity. Clothes should also be dried in the electric dryer as soon as they are done washing to help reduce this problem.
Another thing you should do, especially if you use the basement for a laundry room or if you have an extra bathroom in it, is install an exhaust vent. You can do this in more than one spot if you need to, depending on the size of your basement. This will displace some of the humidity to the outside of the house and not allow it to be soaked up by the ceiling.
Another thing to worry about when you have a humid basement is mold. Mold loves to grow on any dead organic material and once it starts growing, you will be hard pressed to get rid of it without removing the source of the water first. If you have water issues in the basement, make sure these are taken care of before putting any carpet down, since carpet that becomes molded is hard to clean and any padding underneath it that becomes contaminated will have to be torn up and thrown away.
Not All Molds Are Dangerous
No one wants to find mold in their home, but sometimes finding it is the first of our worries. There are a lot of questions that need to be asked after that and most of the time, when a person goes looking for mold in their home, they do not realize this. The questions have to do with what kind of mold it is, what caused it, how to get rid of it, how long it will take, and how much it will cost. This is a lot of headache to deal with, as you can imagine, and while you are dealing with it, the company that you hire to get rid of the mold problem may try to take you for a ride.
What is meant by this? Well, the mold problem that you discover might not be that big of an issue, after all. Cosmetic molds like Ceratocystis can grow in homes and not be a threat to you or the structure of your home at all and yet, some dishonest mold remediation companies will try to convince you that you need a full scale removal done and that this mold is dangerous. This is unfortunate and people get scammed out of thousands of dollars because they simply do not know that cosmetic molds exist.
Ceratocystis is a mold that is a blue-ish color and it will appear on the wooden components of your home and sometimes will even be built into the home itself. This is not a good thing, but it is not enough of a bad thing that you need to worry extensively about how you are going to get rid of it. It will not do any damage to the wood over time and it is not going to harm your health, so why worry?
The only real drawback of this mold in your house is that it is unsightly if it appears in a visible area of your home. If it is outside, you can remove it with sandblasting or pressure washing, but these methods are not recommended for indoors, since they can be pretty messy. You can wash it off indoor surfaces with a scrub brush and a mixture of water and borax detergent. After you finish this, you should remove the water or humidity problem in the area that the mold was found in, if you can, to help slow its return.
What is meant by this? Well, the mold problem that you discover might not be that big of an issue, after all. Cosmetic molds like Ceratocystis can grow in homes and not be a threat to you or the structure of your home at all and yet, some dishonest mold remediation companies will try to convince you that you need a full scale removal done and that this mold is dangerous. This is unfortunate and people get scammed out of thousands of dollars because they simply do not know that cosmetic molds exist.
Ceratocystis is a mold that is a blue-ish color and it will appear on the wooden components of your home and sometimes will even be built into the home itself. This is not a good thing, but it is not enough of a bad thing that you need to worry extensively about how you are going to get rid of it. It will not do any damage to the wood over time and it is not going to harm your health, so why worry?
The only real drawback of this mold in your house is that it is unsightly if it appears in a visible area of your home. If it is outside, you can remove it with sandblasting or pressure washing, but these methods are not recommended for indoors, since they can be pretty messy. You can wash it off indoor surfaces with a scrub brush and a mixture of water and borax detergent. After you finish this, you should remove the water or humidity problem in the area that the mold was found in, if you can, to help slow its return.
Mold, Water Damage, and Condos
If you have just moved into your first home, you may not realize just how much work and effort it takes to keep up a house, even if it only has one bedroom in it. People who live in condominiums and have homeowner’s association fees do not generally have to deal with the maintenance of the building’s structure, but those who have houses are responsible for the entire thing from the ground up. Living in a condo can have its benefits and its downfalls, but if you do not want to have to take care of the structure of the building (if it is an apartment-style complex), then having one of these instead of a house may be for you.
If you are considering renovating a condominium inside a larger apartment-style complex, then you should realize that there are things that you can do and things that you cannot. For instance, replacing the tub and tile in the bathroom is acceptable, but moving the plumbing around to suit your new design is probably not. Structural changes to the inside of a condo are generally something that you need to have approved first. Changing the location of a light in the room also should be inquired about, since this will involve having electrical work done.
Mold growth and water damage in the condominium, though, will be your responsibility. Everything inside the walls of the condo belongs to you and you can do as you wish with most of it, but any mold growth and water damage that occurs inside it will also be your responsibility, especially if it is your fault that it is there. If you have allowed the bath tub to overflow or the dishwasher malfunctions, then that would make it your responsibility to have the problem fixed. If it is due to bad plumbing in the complex, though, you may have a claim.
The condo that you are purchasing should come with exhaust fans in the kitchen and bathroom and if it does not, look around for a window in both these areas. The kitchen and bathroom are areas that are prone to mold growth and water damage if the humidity stays too high. As with any home, you do not want to have appliances that use a lot of water and malfunction on a regular basis. You will be better off purchasing new ones in the long run.
The exception of mold growth being your responsibility is only if the mold spread into your condo from another part of the building. If the entire complex has a problem, then you are not liable. Have a clause on mold inserted into your purchase agreement to protect yourself from mold damage that already exists in the condo.
If you are considering renovating a condominium inside a larger apartment-style complex, then you should realize that there are things that you can do and things that you cannot. For instance, replacing the tub and tile in the bathroom is acceptable, but moving the plumbing around to suit your new design is probably not. Structural changes to the inside of a condo are generally something that you need to have approved first. Changing the location of a light in the room also should be inquired about, since this will involve having electrical work done.
Mold growth and water damage in the condominium, though, will be your responsibility. Everything inside the walls of the condo belongs to you and you can do as you wish with most of it, but any mold growth and water damage that occurs inside it will also be your responsibility, especially if it is your fault that it is there. If you have allowed the bath tub to overflow or the dishwasher malfunctions, then that would make it your responsibility to have the problem fixed. If it is due to bad plumbing in the complex, though, you may have a claim.
The condo that you are purchasing should come with exhaust fans in the kitchen and bathroom and if it does not, look around for a window in both these areas. The kitchen and bathroom are areas that are prone to mold growth and water damage if the humidity stays too high. As with any home, you do not want to have appliances that use a lot of water and malfunction on a regular basis. You will be better off purchasing new ones in the long run.
The exception of mold growth being your responsibility is only if the mold spread into your condo from another part of the building. If the entire complex has a problem, then you are not liable. Have a clause on mold inserted into your purchase agreement to protect yourself from mold damage that already exists in the condo.
Mold Problems in Condos
Purchasing a condominium may be a good option for people who do not wish to be responsible for taking care of the structure of their home; this means that the electrical, plumbing, and general maintenance of the property would be the responsibility of the condominium’s management, not yours. It may depend on your individual agreement to purchase a condo on the property, though.
To protect yourself from being liable for mold damage that may already exist in the condo before you purchase it, you should have a clause addressing that issue inserted into the purchase agreement. This means that if mold spreads to your property from someone else’s or if the toilet overflows in the condo above yours, then the management will take care of any repairs that will need to be done. Before purchasing a condominium, you should always take good care to read all of the paperwork and make sure that you are comfortable with everything included in it. If something makes you uncomfortable or seems unreasonable, you may want to consider purchasing one from somewhere else.
If you discover a mold problem in your condo and it is due to no fault of your own, having it taken care of can be difficult, depending on the honesty and response of your complex’s board. The first thing that you need to do is start a paper trail of complaints and requests that the problem be taken care of. Never do this verbally, because this will not hold up in a court of law. You need written proof of when you complained and sometimes this is best done by sending a certified letter, so you know that the intended party received it.
The next thing that you need to have is hard proof that there is a problem. Hiring a mold inspector to look at the condo and do a report on it first is something that you will need to have if you want to prove that there is an issue with the property that needs to be taken care of. The unfortunate burden of proof is on you, since it is not the responsibility of the complex to prove that there is not a problem.
Small mold issues can be taken care of by you at not much expense and this is often better than trying to get the condominium board to do it for you. Inform them that there is an issue, though, if the mold returns after you cleaned it up. The source of moisture needs to be removed.
Remember, mold problems that originate inside the unit are your responsibility, but if the mold or source of moisture comes from outside your unit, it is their responsibility to have it taken care of.
To protect yourself from being liable for mold damage that may already exist in the condo before you purchase it, you should have a clause addressing that issue inserted into the purchase agreement. This means that if mold spreads to your property from someone else’s or if the toilet overflows in the condo above yours, then the management will take care of any repairs that will need to be done. Before purchasing a condominium, you should always take good care to read all of the paperwork and make sure that you are comfortable with everything included in it. If something makes you uncomfortable or seems unreasonable, you may want to consider purchasing one from somewhere else.
If you discover a mold problem in your condo and it is due to no fault of your own, having it taken care of can be difficult, depending on the honesty and response of your complex’s board. The first thing that you need to do is start a paper trail of complaints and requests that the problem be taken care of. Never do this verbally, because this will not hold up in a court of law. You need written proof of when you complained and sometimes this is best done by sending a certified letter, so you know that the intended party received it.
The next thing that you need to have is hard proof that there is a problem. Hiring a mold inspector to look at the condo and do a report on it first is something that you will need to have if you want to prove that there is an issue with the property that needs to be taken care of. The unfortunate burden of proof is on you, since it is not the responsibility of the complex to prove that there is not a problem.
Small mold issues can be taken care of by you at not much expense and this is often better than trying to get the condominium board to do it for you. Inform them that there is an issue, though, if the mold returns after you cleaned it up. The source of moisture needs to be removed.
Remember, mold problems that originate inside the unit are your responsibility, but if the mold or source of moisture comes from outside your unit, it is their responsibility to have it taken care of.
Mold on Wood Paneling
For some people, the threat that is feared the most is the threat that they cannot see. This is understandable, since if you can see your threat, you can assess how you can best deal with it. Something that tends to be a threat to the health of the people in your home is mold growth and if you have this in your home, you may or may not realize it. Sometimes mold is hidden inside the walls, ceiling, or floor, and we will not know without having a mold inspector come to the house and do some testing.
You can do an inspection of your home for visible mold growth, though, fairly easily. Sometimes you will run across a splotchy patch of drywall in your bathroom or other moist room in your home and you will instantly be able to identify that there is a mold problem in the house. Other times, finding the mold will not be this easy, because the mold is simply invisible. At least, when you look at it the wrong way. Finding mold takes a little detective work sometimes and this is best done with a flashlight.
If your home has wooden paneling anywhere inside it and you have a problem with mold in one area of the house, turn the light off in the room with the paneling and shine the flashlight along the surface of the wood. This will give the mold a little bit of depth and it will show up much better than if you shine the light directly onto the surface at a 90 degree angle. These molds usually belong in the genii Aspergillus or Penicillium and are very easily overlooked if you do not use this flashlight method.
You can clean the mold off the wood paneling with chemicals that are advertised as being able to kill mold, but you may want to be careful just what you put on the surface if it is real wood and not imitation of any kind, especially if you plan on keeping it as a part of your home. If the growth returns after a few days or weeks, though, you may want to consider removing it completely, since the growth may be embedded into it.
The reason for wood paneling in some homes is that they have been flooded and the previous owner could not afford to put drywall back in the damaged areas. If you can afford to remove wood paneling that has no drywall behind it, you really should do this. Replace the paneling with paperless drywall, since mold has a harder time growing on these slabs of drywall than others.
You can do an inspection of your home for visible mold growth, though, fairly easily. Sometimes you will run across a splotchy patch of drywall in your bathroom or other moist room in your home and you will instantly be able to identify that there is a mold problem in the house. Other times, finding the mold will not be this easy, because the mold is simply invisible. At least, when you look at it the wrong way. Finding mold takes a little detective work sometimes and this is best done with a flashlight.
If your home has wooden paneling anywhere inside it and you have a problem with mold in one area of the house, turn the light off in the room with the paneling and shine the flashlight along the surface of the wood. This will give the mold a little bit of depth and it will show up much better than if you shine the light directly onto the surface at a 90 degree angle. These molds usually belong in the genii Aspergillus or Penicillium and are very easily overlooked if you do not use this flashlight method.
You can clean the mold off the wood paneling with chemicals that are advertised as being able to kill mold, but you may want to be careful just what you put on the surface if it is real wood and not imitation of any kind, especially if you plan on keeping it as a part of your home. If the growth returns after a few days or weeks, though, you may want to consider removing it completely, since the growth may be embedded into it.
The reason for wood paneling in some homes is that they have been flooded and the previous owner could not afford to put drywall back in the damaged areas. If you can afford to remove wood paneling that has no drywall behind it, you really should do this. Replace the paneling with paperless drywall, since mold has a harder time growing on these slabs of drywall than others.
Hurricanes and Water Sanitation
The flood waters that wreak havoc on your home when rivers run over their banks or when hurricanes come calling can contain almost anything that you can think of (and some things you can’t) that can be harmful to your health and the health of any pets you may have living with you. If you are unfamiliar with how to prepare for a hurricane, then you may want to do a little research into just what you need to do before the storm hits, especially if you do not plan on leaving your home during that time.
The most important thing that you can have during a hurricane or any other disaster is clean water to drink. You will absolutely not be able to trust the water that comes out of your faucet during the storm, because the local water supply may have been contaminated by sea water, sewage, leaves, sticks, or almost anything else that the wind and water can carry with it. One easy way to get the clean water that you will need for a hurricane is to collect it in milk jugs that you have saved and cleaned out. This is a good alternative to buying a lot of bottled water at the store, especially since it may not be available in the quantity you need by the time you get there.
Purifying water after the storm has already started and you have run out of the supply that you had saved up is not too difficult. If you can get water out of your faucet, you can boil it for at least 10 minutes to get drinking water. If the electricity is off, though, you may not be able to boil anything and you may have to result to water purification tablets, which can be purchased at most outdoor supply stores. Hikers and campers take these with them often, especially when going into the wilderness to camp and not staying at a camp area near town.
The water damage to your home may be very little or extensive, depending on how close to the flooded area of town you are. Your windows should have been boarded up to help prevent the panes from being broken by the wind and as many parts of your home waterproofed so water cannot get inside as possible. If the area outside your home is flooded, do not let children or pets get in these waters, since they are likely contaminated.
The most important thing that you can have during a hurricane or any other disaster is clean water to drink. You will absolutely not be able to trust the water that comes out of your faucet during the storm, because the local water supply may have been contaminated by sea water, sewage, leaves, sticks, or almost anything else that the wind and water can carry with it. One easy way to get the clean water that you will need for a hurricane is to collect it in milk jugs that you have saved and cleaned out. This is a good alternative to buying a lot of bottled water at the store, especially since it may not be available in the quantity you need by the time you get there.
Purifying water after the storm has already started and you have run out of the supply that you had saved up is not too difficult. If you can get water out of your faucet, you can boil it for at least 10 minutes to get drinking water. If the electricity is off, though, you may not be able to boil anything and you may have to result to water purification tablets, which can be purchased at most outdoor supply stores. Hikers and campers take these with them often, especially when going into the wilderness to camp and not staying at a camp area near town.
The water damage to your home may be very little or extensive, depending on how close to the flooded area of town you are. Your windows should have been boarded up to help prevent the panes from being broken by the wind and as many parts of your home waterproofed so water cannot get inside as possible. If the area outside your home is flooded, do not let children or pets get in these waters, since they are likely contaminated.
Condo Ownership, Mold Issues, and More
Owning a condo is a good alternative to owning a house if you do not want to have to keep up with a lot of things that would normally come along with owning a house. Some condominiums do not have yards to take care of and this is convenient for those of us who do not enjoy outside work very much. You will, however, most likely have to pay homeowner’s association fees every month to pay for the upkeep of the property. These fees generally cover plumbing issues, problems with the roof, keeping common areas like pools, gyms, and spas clean. Even though you may not use these areas, you will still have to pay the fees to cover keeping them clean every month.
Issues like mold and water damage that come into your unit from outside its walls (for example, from a neighboring unit or the shell of the building itself) will be taken care of by the condo association and your monthly HOA fees should cover this. If water leaks down from the unit above you and causes mold growth, you are not responsible for cleaning it up most of the time. If you find a mold problem in your unit and you are certain that it is not your fault, you should notify your condo association as soon as possible. It is usually best to do this with a certified letter, so you are absolutely certain that they received your request for assistance. Do not complain verbally, because if you end up having to go to court, a verbal claim will not hold up. You need to create a paper trail of evidence that there is a problem and that you have complained about it. Some states require that problems like this be resolved in a timely manner, so take advantage of this if you live in one of them.
Condos are also governed by a collection of rules that are called “Covenants, Conditions, and Restrictions. This means that there are rules regarding how many people will be living in the unit, whether pets are allowed, what kind of renovations you can do, and sometimes even down to what kind of curtains you want to put up. Most condominiums want the look of the community to remain consistent.
Renting out your unit may also be subject to the approval of the condo association. If they do not like the tenant you choose to rent the condo to, they may not let you do it.
Issues like mold and water damage that come into your unit from outside its walls (for example, from a neighboring unit or the shell of the building itself) will be taken care of by the condo association and your monthly HOA fees should cover this. If water leaks down from the unit above you and causes mold growth, you are not responsible for cleaning it up most of the time. If you find a mold problem in your unit and you are certain that it is not your fault, you should notify your condo association as soon as possible. It is usually best to do this with a certified letter, so you are absolutely certain that they received your request for assistance. Do not complain verbally, because if you end up having to go to court, a verbal claim will not hold up. You need to create a paper trail of evidence that there is a problem and that you have complained about it. Some states require that problems like this be resolved in a timely manner, so take advantage of this if you live in one of them.
Condos are also governed by a collection of rules that are called “Covenants, Conditions, and Restrictions. This means that there are rules regarding how many people will be living in the unit, whether pets are allowed, what kind of renovations you can do, and sometimes even down to what kind of curtains you want to put up. Most condominiums want the look of the community to remain consistent.
Renting out your unit may also be subject to the approval of the condo association. If they do not like the tenant you choose to rent the condo to, they may not let you do it.
Subscribe to:
Posts (Atom)
