The process of removing mold from your home can be a long and tedious one, depending on how large the infection is and whether you are choosing to take care of the problem yourself or have a professional take care of the problem for you. The most efficient solution for those who have the money, but not a lot of time is to have a professional mold remediation company remove the mold and all affected materials from the property, but not everyone can afford to have this done. So, the option of removing the mold yourself is available, but only for those who have the knowledge and proper equipment to do so.
You can perform most mold removal projects on your own, but projects that require you remove material from walls, floors, or ceilings are best undertaken by those who have experience in interior remodeling and renovation. Scrubbing mold off of certain areas of the home is fairly easy and is an efficient way to deal with a mold problem, as long as the mold has not embedded itself into the surface. Drywall is particularly at risk for having to be replaced if the mold infection becomes too extensive.
You will need buckets of water and the cleaning solution of your choice, along with sponges, rags, or whatever you decide to use while doing the cleanup. Wearing latex or rubber gloves is recommended for this, since coming into contact with mold can cause skin rashes. Heavy trash bags will be needed to dispose of waste in.
Something else you may want to purchase is a respirator, particularly if you are going to be opening up any walls and releasing mold spores into the air. An N-95 respirator can be purchased from your local hardware store and is the lowest level of protection available. If you want more protection than that, you can purchase a half or full face mask respirator with a HEPA filter attached to it.
Wearing disposable protective clothing is also recommended if the mold problem is extensive in any area of the house. Protective shoe covers should also be worn and duct tape used to seal up the gaps in the suit on the wrists and ankles.
Something else you may want to purchase is an air purifier with a HEPA filter built into it. This will help clean the air in your home and remove almost anything you can think of, including mold spores stirred up by the removal, and your health will improve. Depending on your financial situation, you may not be able to afford this, but if you can afford it, purchasing one of these air purifiers will be one of the best health investments you can make.
Showing posts with label panneling. Show all posts
Showing posts with label panneling. Show all posts
Friday, January 18, 2008
Not All Molds Are Dangerous
No one wants to find mold in their home, but sometimes finding it is the first of our worries. There are a lot of questions that need to be asked after that and most of the time, when a person goes looking for mold in their home, they do not realize this. The questions have to do with what kind of mold it is, what caused it, how to get rid of it, how long it will take, and how much it will cost. This is a lot of headache to deal with, as you can imagine, and while you are dealing with it, the company that you hire to get rid of the mold problem may try to take you for a ride.
What is meant by this? Well, the mold problem that you discover might not be that big of an issue, after all. Cosmetic molds like Ceratocystis can grow in homes and not be a threat to you or the structure of your home at all and yet, some dishonest mold remediation companies will try to convince you that you need a full scale removal done and that this mold is dangerous. This is unfortunate and people get scammed out of thousands of dollars because they simply do not know that cosmetic molds exist.
Ceratocystis is a mold that is a blue-ish color and it will appear on the wooden components of your home and sometimes will even be built into the home itself. This is not a good thing, but it is not enough of a bad thing that you need to worry extensively about how you are going to get rid of it. It will not do any damage to the wood over time and it is not going to harm your health, so why worry?
The only real drawback of this mold in your house is that it is unsightly if it appears in a visible area of your home. If it is outside, you can remove it with sandblasting or pressure washing, but these methods are not recommended for indoors, since they can be pretty messy. You can wash it off indoor surfaces with a scrub brush and a mixture of water and borax detergent. After you finish this, you should remove the water or humidity problem in the area that the mold was found in, if you can, to help slow its return.
What is meant by this? Well, the mold problem that you discover might not be that big of an issue, after all. Cosmetic molds like Ceratocystis can grow in homes and not be a threat to you or the structure of your home at all and yet, some dishonest mold remediation companies will try to convince you that you need a full scale removal done and that this mold is dangerous. This is unfortunate and people get scammed out of thousands of dollars because they simply do not know that cosmetic molds exist.
Ceratocystis is a mold that is a blue-ish color and it will appear on the wooden components of your home and sometimes will even be built into the home itself. This is not a good thing, but it is not enough of a bad thing that you need to worry extensively about how you are going to get rid of it. It will not do any damage to the wood over time and it is not going to harm your health, so why worry?
The only real drawback of this mold in your house is that it is unsightly if it appears in a visible area of your home. If it is outside, you can remove it with sandblasting or pressure washing, but these methods are not recommended for indoors, since they can be pretty messy. You can wash it off indoor surfaces with a scrub brush and a mixture of water and borax detergent. After you finish this, you should remove the water or humidity problem in the area that the mold was found in, if you can, to help slow its return.
Mold, Water Damage, and Condos
If you have just moved into your first home, you may not realize just how much work and effort it takes to keep up a house, even if it only has one bedroom in it. People who live in condominiums and have homeowner’s association fees do not generally have to deal with the maintenance of the building’s structure, but those who have houses are responsible for the entire thing from the ground up. Living in a condo can have its benefits and its downfalls, but if you do not want to have to take care of the structure of the building (if it is an apartment-style complex), then having one of these instead of a house may be for you.
If you are considering renovating a condominium inside a larger apartment-style complex, then you should realize that there are things that you can do and things that you cannot. For instance, replacing the tub and tile in the bathroom is acceptable, but moving the plumbing around to suit your new design is probably not. Structural changes to the inside of a condo are generally something that you need to have approved first. Changing the location of a light in the room also should be inquired about, since this will involve having electrical work done.
Mold growth and water damage in the condominium, though, will be your responsibility. Everything inside the walls of the condo belongs to you and you can do as you wish with most of it, but any mold growth and water damage that occurs inside it will also be your responsibility, especially if it is your fault that it is there. If you have allowed the bath tub to overflow or the dishwasher malfunctions, then that would make it your responsibility to have the problem fixed. If it is due to bad plumbing in the complex, though, you may have a claim.
The condo that you are purchasing should come with exhaust fans in the kitchen and bathroom and if it does not, look around for a window in both these areas. The kitchen and bathroom are areas that are prone to mold growth and water damage if the humidity stays too high. As with any home, you do not want to have appliances that use a lot of water and malfunction on a regular basis. You will be better off purchasing new ones in the long run.
The exception of mold growth being your responsibility is only if the mold spread into your condo from another part of the building. If the entire complex has a problem, then you are not liable. Have a clause on mold inserted into your purchase agreement to protect yourself from mold damage that already exists in the condo.
If you are considering renovating a condominium inside a larger apartment-style complex, then you should realize that there are things that you can do and things that you cannot. For instance, replacing the tub and tile in the bathroom is acceptable, but moving the plumbing around to suit your new design is probably not. Structural changes to the inside of a condo are generally something that you need to have approved first. Changing the location of a light in the room also should be inquired about, since this will involve having electrical work done.
Mold growth and water damage in the condominium, though, will be your responsibility. Everything inside the walls of the condo belongs to you and you can do as you wish with most of it, but any mold growth and water damage that occurs inside it will also be your responsibility, especially if it is your fault that it is there. If you have allowed the bath tub to overflow or the dishwasher malfunctions, then that would make it your responsibility to have the problem fixed. If it is due to bad plumbing in the complex, though, you may have a claim.
The condo that you are purchasing should come with exhaust fans in the kitchen and bathroom and if it does not, look around for a window in both these areas. The kitchen and bathroom are areas that are prone to mold growth and water damage if the humidity stays too high. As with any home, you do not want to have appliances that use a lot of water and malfunction on a regular basis. You will be better off purchasing new ones in the long run.
The exception of mold growth being your responsibility is only if the mold spread into your condo from another part of the building. If the entire complex has a problem, then you are not liable. Have a clause on mold inserted into your purchase agreement to protect yourself from mold damage that already exists in the condo.
Mold Problems in Condos
Purchasing a condominium may be a good option for people who do not wish to be responsible for taking care of the structure of their home; this means that the electrical, plumbing, and general maintenance of the property would be the responsibility of the condominium’s management, not yours. It may depend on your individual agreement to purchase a condo on the property, though.
To protect yourself from being liable for mold damage that may already exist in the condo before you purchase it, you should have a clause addressing that issue inserted into the purchase agreement. This means that if mold spreads to your property from someone else’s or if the toilet overflows in the condo above yours, then the management will take care of any repairs that will need to be done. Before purchasing a condominium, you should always take good care to read all of the paperwork and make sure that you are comfortable with everything included in it. If something makes you uncomfortable or seems unreasonable, you may want to consider purchasing one from somewhere else.
If you discover a mold problem in your condo and it is due to no fault of your own, having it taken care of can be difficult, depending on the honesty and response of your complex’s board. The first thing that you need to do is start a paper trail of complaints and requests that the problem be taken care of. Never do this verbally, because this will not hold up in a court of law. You need written proof of when you complained and sometimes this is best done by sending a certified letter, so you know that the intended party received it.
The next thing that you need to have is hard proof that there is a problem. Hiring a mold inspector to look at the condo and do a report on it first is something that you will need to have if you want to prove that there is an issue with the property that needs to be taken care of. The unfortunate burden of proof is on you, since it is not the responsibility of the complex to prove that there is not a problem.
Small mold issues can be taken care of by you at not much expense and this is often better than trying to get the condominium board to do it for you. Inform them that there is an issue, though, if the mold returns after you cleaned it up. The source of moisture needs to be removed.
Remember, mold problems that originate inside the unit are your responsibility, but if the mold or source of moisture comes from outside your unit, it is their responsibility to have it taken care of.
To protect yourself from being liable for mold damage that may already exist in the condo before you purchase it, you should have a clause addressing that issue inserted into the purchase agreement. This means that if mold spreads to your property from someone else’s or if the toilet overflows in the condo above yours, then the management will take care of any repairs that will need to be done. Before purchasing a condominium, you should always take good care to read all of the paperwork and make sure that you are comfortable with everything included in it. If something makes you uncomfortable or seems unreasonable, you may want to consider purchasing one from somewhere else.
If you discover a mold problem in your condo and it is due to no fault of your own, having it taken care of can be difficult, depending on the honesty and response of your complex’s board. The first thing that you need to do is start a paper trail of complaints and requests that the problem be taken care of. Never do this verbally, because this will not hold up in a court of law. You need written proof of when you complained and sometimes this is best done by sending a certified letter, so you know that the intended party received it.
The next thing that you need to have is hard proof that there is a problem. Hiring a mold inspector to look at the condo and do a report on it first is something that you will need to have if you want to prove that there is an issue with the property that needs to be taken care of. The unfortunate burden of proof is on you, since it is not the responsibility of the complex to prove that there is not a problem.
Small mold issues can be taken care of by you at not much expense and this is often better than trying to get the condominium board to do it for you. Inform them that there is an issue, though, if the mold returns after you cleaned it up. The source of moisture needs to be removed.
Remember, mold problems that originate inside the unit are your responsibility, but if the mold or source of moisture comes from outside your unit, it is their responsibility to have it taken care of.
Mold on Wood Paneling
For some people, the threat that is feared the most is the threat that they cannot see. This is understandable, since if you can see your threat, you can assess how you can best deal with it. Something that tends to be a threat to the health of the people in your home is mold growth and if you have this in your home, you may or may not realize it. Sometimes mold is hidden inside the walls, ceiling, or floor, and we will not know without having a mold inspector come to the house and do some testing.
You can do an inspection of your home for visible mold growth, though, fairly easily. Sometimes you will run across a splotchy patch of drywall in your bathroom or other moist room in your home and you will instantly be able to identify that there is a mold problem in the house. Other times, finding the mold will not be this easy, because the mold is simply invisible. At least, when you look at it the wrong way. Finding mold takes a little detective work sometimes and this is best done with a flashlight.
If your home has wooden paneling anywhere inside it and you have a problem with mold in one area of the house, turn the light off in the room with the paneling and shine the flashlight along the surface of the wood. This will give the mold a little bit of depth and it will show up much better than if you shine the light directly onto the surface at a 90 degree angle. These molds usually belong in the genii Aspergillus or Penicillium and are very easily overlooked if you do not use this flashlight method.
You can clean the mold off the wood paneling with chemicals that are advertised as being able to kill mold, but you may want to be careful just what you put on the surface if it is real wood and not imitation of any kind, especially if you plan on keeping it as a part of your home. If the growth returns after a few days or weeks, though, you may want to consider removing it completely, since the growth may be embedded into it.
The reason for wood paneling in some homes is that they have been flooded and the previous owner could not afford to put drywall back in the damaged areas. If you can afford to remove wood paneling that has no drywall behind it, you really should do this. Replace the paneling with paperless drywall, since mold has a harder time growing on these slabs of drywall than others.
You can do an inspection of your home for visible mold growth, though, fairly easily. Sometimes you will run across a splotchy patch of drywall in your bathroom or other moist room in your home and you will instantly be able to identify that there is a mold problem in the house. Other times, finding the mold will not be this easy, because the mold is simply invisible. At least, when you look at it the wrong way. Finding mold takes a little detective work sometimes and this is best done with a flashlight.
If your home has wooden paneling anywhere inside it and you have a problem with mold in one area of the house, turn the light off in the room with the paneling and shine the flashlight along the surface of the wood. This will give the mold a little bit of depth and it will show up much better than if you shine the light directly onto the surface at a 90 degree angle. These molds usually belong in the genii Aspergillus or Penicillium and are very easily overlooked if you do not use this flashlight method.
You can clean the mold off the wood paneling with chemicals that are advertised as being able to kill mold, but you may want to be careful just what you put on the surface if it is real wood and not imitation of any kind, especially if you plan on keeping it as a part of your home. If the growth returns after a few days or weeks, though, you may want to consider removing it completely, since the growth may be embedded into it.
The reason for wood paneling in some homes is that they have been flooded and the previous owner could not afford to put drywall back in the damaged areas. If you can afford to remove wood paneling that has no drywall behind it, you really should do this. Replace the paneling with paperless drywall, since mold has a harder time growing on these slabs of drywall than others.
Subscribe to:
Posts (Atom)
