Anyone who has ever owned a laptop or other electronic device knows that whatever you do, you should not let it come into contact with water, especially a large quantity of it. With laptops, water is usually spilled on the keyboard due to the misplacement of a drink or by knocking it over. The problem is not with the water itself, but with the electricity running through the device at the time the liquid is spilled. It is the combination of the two that does the damage to the motherboard, not the simple act of spilling water on it. During the manufacturing process, circuit boards like this are washed in clean water to remove anything from their surfaces before they are packaged and shipped. However, if you need to clean off your motherboard on your desktop or your laptop due to a collection of dust or spilling anything, you should use rubbing alcohol, not water.
As with your response to water coming into contact with any electronic device, it should be immediate.
As soon as it happens, you should turn the laptop upside down, remove the A/C cord, and remove the battery. Turning the laptop upside down serves to let the excess liquid drain out of it and you should do this until it stops dripping out. Proceed to dry off the outside of the laptop with a cloth or paper towels after this.
As long as you disconnect the power source as soon as possible and allow the device to dry out completely, it should be fine. Do not try to power on the device before you are certain that it is completely dry on the inside. Of course, this is only if you have only spilled water on it, not if you have spilled an acidic beverage such as cola or coffee onto it. This will require some extra steps to take care of and may require that you take the laptop apart.
If you think you may have to have it taken apart to clean the cola or coffee off of the circuit board on the inside, then you may want to consider having it taken to a computer repair shop. It will cost a little money, but unless you are familiar with electronics and really feel that you know what you are doing, this is your best option. They will make sure that your laptop is in working order, as long as you made sure that the liquid did not assist in frying the motherboard.
Friday, January 18, 2008
Stopping Mold Growth in the Bathroom
If you live in an older home, the probability that mold exists somewhere in your bathroom is pretty high, especially if the floor or walls are damaged in any way. Most people do not realize how hazardous mold can be to their health and do not go looking for mold in their homes when they really should. It can exist in several different areas, but the bathroom tends to be one of the best places to find it in large quantities since this room is naturally moist and large amounts of water travel in and out of it every single day.
There are a number of things that you can do to help prevent mold growth in your bathroom and most of them do not require much effort or money to be effective. One of the first things that you need to do is make sure that the entire floor of your bathroom is waterproofed. Whether you have tile, linoleum, marble, or anything else on the floor, it should be completely water tight to stop water from getting to the floor joists underneath. Water damage affects many bathroom floors across the country and the last time you want to happen while you are in the bathroom is the floor collapsing out from under you. The areas directly around the bathtub and toilet are particularly at risk, since both of these items can and commonly do overflow.
Something else you should worry about is the condition of the drywall on the ceiling. The steam created by hot water in the tub or shower is absorbed by this drywall on a regular basis if it remains trapped in the bathroom and is not allowed to escape to the outside of the house. Not only can this cause mold growth on the upper walls and ceiling, but it can also cause the drywall to buckle and collapse on you. The best way to let it out is either through a window or by installing an exhaust vent, which most building codes require be in the bathroom. You should have at least one of these two things in the bathroom, if not both. Leaving the window open for steam to escape may not always be practical due to bad weather outside.
The last thing that you need to do is keep a check on the plumbing around the toilet and under the sink. The toilet should not clog up and overflow often; if it does, you should have the lines checked by a professional.
There are a number of things that you can do to help prevent mold growth in your bathroom and most of them do not require much effort or money to be effective. One of the first things that you need to do is make sure that the entire floor of your bathroom is waterproofed. Whether you have tile, linoleum, marble, or anything else on the floor, it should be completely water tight to stop water from getting to the floor joists underneath. Water damage affects many bathroom floors across the country and the last time you want to happen while you are in the bathroom is the floor collapsing out from under you. The areas directly around the bathtub and toilet are particularly at risk, since both of these items can and commonly do overflow.
Something else you should worry about is the condition of the drywall on the ceiling. The steam created by hot water in the tub or shower is absorbed by this drywall on a regular basis if it remains trapped in the bathroom and is not allowed to escape to the outside of the house. Not only can this cause mold growth on the upper walls and ceiling, but it can also cause the drywall to buckle and collapse on you. The best way to let it out is either through a window or by installing an exhaust vent, which most building codes require be in the bathroom. You should have at least one of these two things in the bathroom, if not both. Leaving the window open for steam to escape may not always be practical due to bad weather outside.
The last thing that you need to do is keep a check on the plumbing around the toilet and under the sink. The toilet should not clog up and overflow often; if it does, you should have the lines checked by a professional.
Removing Mold And The Equipment You Need
The process of removing mold from your home can be a long and tedious one, depending on how large the infection is and whether you are choosing to take care of the problem yourself or have a professional take care of the problem for you. The most efficient solution for those who have the money, but not a lot of time is to have a professional mold remediation company remove the mold and all affected materials from the property, but not everyone can afford to have this done. So, the option of removing the mold yourself is available, but only for those who have the knowledge and proper equipment to do so.
You can perform most mold removal projects on your own, but projects that require you remove material from walls, floors, or ceilings are best undertaken by those who have experience in interior remodeling and renovation. Scrubbing mold off of certain areas of the home is fairly easy and is an efficient way to deal with a mold problem, as long as the mold has not embedded itself into the surface. Drywall is particularly at risk for having to be replaced if the mold infection becomes too extensive.
You will need buckets of water and the cleaning solution of your choice, along with sponges, rags, or whatever you decide to use while doing the cleanup. Wearing latex or rubber gloves is recommended for this, since coming into contact with mold can cause skin rashes. Heavy trash bags will be needed to dispose of waste in.
Something else you may want to purchase is a respirator, particularly if you are going to be opening up any walls and releasing mold spores into the air. An N-95 respirator can be purchased from your local hardware store and is the lowest level of protection available. If you want more protection than that, you can purchase a half or full face mask respirator with a HEPA filter attached to it.
Wearing disposable protective clothing is also recommended if the mold problem is extensive in any area of the house. Protective shoe covers should also be worn and duct tape used to seal up the gaps in the suit on the wrists and ankles.
Something else you may want to purchase is an air purifier with a HEPA filter built into it. This will help clean the air in your home and remove almost anything you can think of, including mold spores stirred up by the removal, and your health will improve. Depending on your financial situation, you may not be able to afford this, but if you can afford it, purchasing one of these air purifiers will be one of the best health investments you can make.
You can perform most mold removal projects on your own, but projects that require you remove material from walls, floors, or ceilings are best undertaken by those who have experience in interior remodeling and renovation. Scrubbing mold off of certain areas of the home is fairly easy and is an efficient way to deal with a mold problem, as long as the mold has not embedded itself into the surface. Drywall is particularly at risk for having to be replaced if the mold infection becomes too extensive.
You will need buckets of water and the cleaning solution of your choice, along with sponges, rags, or whatever you decide to use while doing the cleanup. Wearing latex or rubber gloves is recommended for this, since coming into contact with mold can cause skin rashes. Heavy trash bags will be needed to dispose of waste in.
Something else you may want to purchase is a respirator, particularly if you are going to be opening up any walls and releasing mold spores into the air. An N-95 respirator can be purchased from your local hardware store and is the lowest level of protection available. If you want more protection than that, you can purchase a half or full face mask respirator with a HEPA filter attached to it.
Wearing disposable protective clothing is also recommended if the mold problem is extensive in any area of the house. Protective shoe covers should also be worn and duct tape used to seal up the gaps in the suit on the wrists and ankles.
Something else you may want to purchase is an air purifier with a HEPA filter built into it. This will help clean the air in your home and remove almost anything you can think of, including mold spores stirred up by the removal, and your health will improve. Depending on your financial situation, you may not be able to afford this, but if you can afford it, purchasing one of these air purifiers will be one of the best health investments you can make.
Subscribe to:
Posts (Atom)
