It does not take long to realize that one who chooses to remedy a mold infestation on their own, as opposed to hiring a professional to do the deed, will probably be wondering as to what the safest way to do this is. It is important that safety is first and foremost on the long list of things to take into account when dealing with the scourge on one’s home that is mold. Aggravation of asthma, emphysema, respiratory infections, rashes, eye infections, and even death are just some of the health complications that can come about from having mold in the home.
One of the best ways to ensure that the remediation process is as safe as possible is to know the kind of tools the job will call for. And to know what the job will call for, you must know just how much mold needs to be removed. If there is mold growing on the walls of your home, then trying to wash the mold off with mold killing chemicals probably, and unfortunately, will not work. In fact, possibly the only solution is the most expensive solution and that would be completely removing and replacing the drywall. However, if the mold has not seeped all the way into the drywall, then this may not be required.
It comes highly recommended that one uses heavy duty mold killing chemicals in the remediation process. If you read product reviews, it should be easy to become committed to buying a particular cleaner. It is also recommended that you buy a high strength brand of trash bag to keep on hand, should any contaminated materials be discovered that should be disposed of immediately. It is very important that you do not touch anything contaminated that you throw away, as it is possible to cause cross contamination.
You should also purchase some sort of respirator during the remediation process, no matter how serious the contamination is. A half or full face mask respirator will most likely be required if you are going to be removing the drywall or any other possible building materials from your home or building. A full face mask can be purchased for roughly $130. You should also buy disposable protective clothing which is fairly inexpensive, especially when you consider the amount of protection that will be received from them. Breathable gloves should be, but these can often only be bought in bulk quantities.
You should also purchase a vacuum with a HEPA filter. These vacuums collect mold spores that have settled onto the floor and have possibly worked their way into the fibers of your carpet.
Jim Corkern is a writer and promoter of quality
Water Damage Miami and
water damage restoration in atlanta companies.
Friday, September 28, 2007
Prevent Mold From Growing On Your Stuff
I know that I do not like mold on my stuff and you probably do not, either, but sometimes we dig into our closets and discover an old favorite item of clothing only to find that it is stinky and covered in mold. What a disappointment. This happens more often than some of us realize and the solution that we usually come up with is just to throw the item away. But, why let it get that way in the first place? What can you do to stop mold from getting on your things? There are a few different ways to help prevent mold from growing not only just in your home, but also on your stuff.
Since we are already talking about moldy clothes, one of the worst things that you can do is to pack your clothing extremely tightly into your closet. Maybe you have an aunt or a grandmother that has a closet packed to the brim with clothing that they never wear, but they might not realize that by trying to save space, they are actually helping mold to grow in the closet full of the clothes that they love so much. Air cannot circulate in these packed closets and add to that high humidity and warmth and you get mold. Some closets have vents installed in the floors to help alleviate this problem, but packing the closets so tight you can barely move them aside to get the shirt or pair of pants that you want completely defeats the purpose of the vent. Try not to pack your closets so full and if you cannot help it, simply get rid of some clothes.
Wet clothes are also particularly a problem, especially during the summertime when people go swimming. These are often thrown on the floor of the laundry room and left for some other person to pick up, but if you are the person that is supposed to pick them up, please do so. Wash wet clothes as soon as you can, especially if you can do this before they dry out. If you can help it, never throw dry clothes on top of wet ones because you will forget about them and mold will begin to grow pretty soon.
If you have baby bottles or any bottle that is oddly shaped, perhaps with a hollow handle that allows liquid inside, you probably have a hard time getting them completely dry if you do not have a dishwasher. To keep mold from growing in these, simply put them in the freezer after you wash them.
Jim Corkern is a writer and promoter of quality
Los Angeles water damage and restoration services and Denver water damage restoration companies.
Since we are already talking about moldy clothes, one of the worst things that you can do is to pack your clothing extremely tightly into your closet. Maybe you have an aunt or a grandmother that has a closet packed to the brim with clothing that they never wear, but they might not realize that by trying to save space, they are actually helping mold to grow in the closet full of the clothes that they love so much. Air cannot circulate in these packed closets and add to that high humidity and warmth and you get mold. Some closets have vents installed in the floors to help alleviate this problem, but packing the closets so tight you can barely move them aside to get the shirt or pair of pants that you want completely defeats the purpose of the vent. Try not to pack your closets so full and if you cannot help it, simply get rid of some clothes.
Wet clothes are also particularly a problem, especially during the summertime when people go swimming. These are often thrown on the floor of the laundry room and left for some other person to pick up, but if you are the person that is supposed to pick them up, please do so. Wash wet clothes as soon as you can, especially if you can do this before they dry out. If you can help it, never throw dry clothes on top of wet ones because you will forget about them and mold will begin to grow pretty soon.
If you have baby bottles or any bottle that is oddly shaped, perhaps with a hollow handle that allows liquid inside, you probably have a hard time getting them completely dry if you do not have a dishwasher. To keep mold from growing in these, simply put them in the freezer after you wash them.
Jim Corkern is a writer and promoter of quality
Los Angeles water damage and restoration services and Denver water damage restoration companies.
Your Cell Phone, Water, and a Sticker
Water is a part of our everyday lives, but most of us who own electronic devices can readily admit that it is not only the source of live, but also the source of some pretty pricey problems. It is every cell phone or blackberry owner’s nightmare: dropping that $400 device into the bathtub or into the pool. What do you do with it after you drop it into water? How late is too late to save it? And if it can be saved, how do you do it?
Well, if you have a newer cell phone, odds are that if you drop it in water, you will not be able to get the phone’s warranty to cover the water damage. It is not covered under most cell phone warranties and this is one reason that you should be especially careful if you plan on getting your phone anywhere near water. The new phones have been equipped with small white stickers both inside the battery compartments and on the circuit board deeper inside the phone. When the phone gets wet (or when it is simply exposed to humidity that is just too high), the sticker changes color due to a powdered dye underneath it. When you take your phone to the manufacturer to try and file a claim, they tell you that they cannot give you any compensation because the phone has been water damaged, even if you have not actually dropped the phone in water. If humidity is too high, the sticker trips and you are out of luck.
What can you do to try and remedy this problem? If you live in an area that is subject to pretty high humidity, you can take a piece of satin finished scotch tape and place a piece over the sticker on the battery compartment. The problem is getting to the other sticker that is usually on the phone’s circuit board. If you can manage that, then hat’s off to you. If your phone stops working and you need to file a claim, remove the tape.
If you do happen to drop your phone in the water, get it out in under 20 seconds and remove the power supply completely. Submerge it in a bowl of uncooked rice at least overnight and do NOT try to power on the phone until you are completely certain it is dry. If you put the battery back in and it works, congratulations. If not, try using it with your AC adapter. If this works, all you need is a new phone battery.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
Well, if you have a newer cell phone, odds are that if you drop it in water, you will not be able to get the phone’s warranty to cover the water damage. It is not covered under most cell phone warranties and this is one reason that you should be especially careful if you plan on getting your phone anywhere near water. The new phones have been equipped with small white stickers both inside the battery compartments and on the circuit board deeper inside the phone. When the phone gets wet (or when it is simply exposed to humidity that is just too high), the sticker changes color due to a powdered dye underneath it. When you take your phone to the manufacturer to try and file a claim, they tell you that they cannot give you any compensation because the phone has been water damaged, even if you have not actually dropped the phone in water. If humidity is too high, the sticker trips and you are out of luck.
What can you do to try and remedy this problem? If you live in an area that is subject to pretty high humidity, you can take a piece of satin finished scotch tape and place a piece over the sticker on the battery compartment. The problem is getting to the other sticker that is usually on the phone’s circuit board. If you can manage that, then hat’s off to you. If your phone stops working and you need to file a claim, remove the tape.
If you do happen to drop your phone in the water, get it out in under 20 seconds and remove the power supply completely. Submerge it in a bowl of uncooked rice at least overnight and do NOT try to power on the phone until you are completely certain it is dry. If you put the battery back in and it works, congratulations. If not, try using it with your AC adapter. If this works, all you need is a new phone battery.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
Testing Your Home For Mold
Testing for mold in your home is not really a complicated process, but if you should know that if you do not follow the instructions that come on the package to the letter, the test will be almost completely useless both to you and to the mold laboratory that you send the test kit samples to. Most test kits are fairly straight forward, but this is a rundown of what you are going to have to do, even if you do not use just the test kits.
Sometimes knowing where you need to test for mold contamination is pretty easily simply because of the fact that the mold is either completely visible on the walls, ceiling, or other belongings, but also due to the fact that many kinds of mold have a significant musty odor to them. You can take a sample of the mold that you can see on the walls by taking a knife (a clean one) and scraping some of it off into the test kit. Be careful here and do not inhale the mold spores. Wear rubber gloves and a respirator while doing this, if you can. Whether you are wearing gloves or not, though, you should wash your hands afterward before going to test another site and especially before you eat anything.
If you want to, you can also take a piece of scotch tape and lift some of the mold off the wall. Some people may prefer this over the knife method, but it is a matter of personal preference. The knife method is more likely to stir up the spores than the tape method.
Set a test kit out in every room of your home after you have run the air conditioner or fans in every room for about ten to fifteen minutes to get the spores stirred up. Tape at least one kit to the grill of an air conditioning vent so you will know if there is any mold growing inside the duct itself. If the air conditioner continues to blow mold spores out into the house after it has been run for about 15 minutes, you know you have a problem in your ventilation system.
After you collect the test kits from around your house, you need to label them all with your name, address, where each test kit was used in the home, and any other pertinent information. This should also include how long you left the test kit setting out in your home, whether it was 30 minutes or a day.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
Sometimes knowing where you need to test for mold contamination is pretty easily simply because of the fact that the mold is either completely visible on the walls, ceiling, or other belongings, but also due to the fact that many kinds of mold have a significant musty odor to them. You can take a sample of the mold that you can see on the walls by taking a knife (a clean one) and scraping some of it off into the test kit. Be careful here and do not inhale the mold spores. Wear rubber gloves and a respirator while doing this, if you can. Whether you are wearing gloves or not, though, you should wash your hands afterward before going to test another site and especially before you eat anything.
If you want to, you can also take a piece of scotch tape and lift some of the mold off the wall. Some people may prefer this over the knife method, but it is a matter of personal preference. The knife method is more likely to stir up the spores than the tape method.
Set a test kit out in every room of your home after you have run the air conditioner or fans in every room for about ten to fifteen minutes to get the spores stirred up. Tape at least one kit to the grill of an air conditioning vent so you will know if there is any mold growing inside the duct itself. If the air conditioner continues to blow mold spores out into the house after it has been run for about 15 minutes, you know you have a problem in your ventilation system.
After you collect the test kits from around your house, you need to label them all with your name, address, where each test kit was used in the home, and any other pertinent information. This should also include how long you left the test kit setting out in your home, whether it was 30 minutes or a day.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
Monday, September 10, 2007
Water Damage Prone Areas of the Bathroom
Water damage in the bathroom is some serious business, since it can lower the value of your home significantly if it is not taken care of and also since it causes the bathroom to be unattractive to you and the rest of your family. Structural problems are also a hazard, but in the beginning the damage will only be cosmetic. This is fortunate, since you will be able to notice that there is a problem long before it does any long lasting damage. There are a few things that you can do to watch for water damage occurring to one of the most important rooms in your home.
There are several different junctions of water in your bathroom and they need to be inspected regularly and thoroughly to detect the presence of water damage. These are the sink, toilet, bath tub, and shower.
The shower and bath tub can require some special maintenance and attention. The tiles around the tub may crack over time and if they are, you should replace them and note whether there is any missing grout between any of the tiles. This grout needs to be filled in to keep water from seeping underneath the tile and damaging the wood underneath. Cracked caulking around the joints where the tile meets the walls or the tub needs to be replaced, as well.
The sink should be looked at every time you do a bathroom inspection, as the plumbing underneath could possibly be leaking. The seals in the pipes should be replaced if they are found to be loose or cracked in any way.
The toilet is also a vulnerable area of the bathroom. Any signs of moisture on the floor around the base of the toilet should be paid close attention to and any cracked tile around the base should be replaced. Toilets are notorious for overflowing due to clogs and one of the best ways to prevent this is to not put more toilet paper in it than it can handle at once. Hanging toilet bowl cleansers are also not advised, because these are likely to cause clogging.
Checking out the plumbing inside the walls can be difficult to do, but if you keep an eye out for signs of moisture on the walls and around the floor, you should be able to detect any leaks before they do any great amount of damage.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
There are several different junctions of water in your bathroom and they need to be inspected regularly and thoroughly to detect the presence of water damage. These are the sink, toilet, bath tub, and shower.
The shower and bath tub can require some special maintenance and attention. The tiles around the tub may crack over time and if they are, you should replace them and note whether there is any missing grout between any of the tiles. This grout needs to be filled in to keep water from seeping underneath the tile and damaging the wood underneath. Cracked caulking around the joints where the tile meets the walls or the tub needs to be replaced, as well.
The sink should be looked at every time you do a bathroom inspection, as the plumbing underneath could possibly be leaking. The seals in the pipes should be replaced if they are found to be loose or cracked in any way.
The toilet is also a vulnerable area of the bathroom. Any signs of moisture on the floor around the base of the toilet should be paid close attention to and any cracked tile around the base should be replaced. Toilets are notorious for overflowing due to clogs and one of the best ways to prevent this is to not put more toilet paper in it than it can handle at once. Hanging toilet bowl cleansers are also not advised, because these are likely to cause clogging.
Checking out the plumbing inside the walls can be difficult to do, but if you keep an eye out for signs of moisture on the walls and around the floor, you should be able to detect any leaks before they do any great amount of damage.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
Water Damage Prevention: Exhaust Fans
Keeping moisture out of your bathroom can be a big task, but installing an exhaust vent over the bath tub or the shower can be a tremendous help in this endeavor.
The purpose of the unit is to remove the steam from the bathroom so it does not become absorbed by the ceiling and walls in the bathroom and cause water damage. Mold growth is also a typical problem in the bathroom, so the exhaust fan will actually help you fight this second problem.
The quality of the fan is important. The quieter the fan’s operation, the higher the quality is. Some manufacturers do not put a noise rating on the packaging of the product, but most tend to do this to separate their high end exhaust fans from their basic ones. The other determining factor is how much air the exhaust fan will move per minute. The higher quality the fan, the more air it will remove from the room.
Ask yourself whether or not you want a light integrated into the fan unit. If so, then you might need a little bit of knowledge of how the electrical system in your house works. Purchasing a book on the subject is advised if you plan on installing the unit yourself.
If the fan is going to have a light in it, then it is a good idea to use the hole in your ceiling that should already exist from your original overhead light. If this does not exist or you want the fan separate from the light, you will create a hole with the jab saw. The electrical book you should have purchased should lay out the options on the kinds of switches you can use and how each one should be wired so you know you have continuity and that the wiring you install is correct.
After you are done wiring the fan, the exhaust duct kit will be installed next and this should come with instructions. This kit can be purchased at some hardware stores and home improvement stores.
Venting the air to the outside with the hose that came with the duct kit is not that difficult to do. Find the nearest soffit in your attic and cut a hole in it that follows the instructions that came with your duct kit. Attach the hose to it and you should be finished.
You will save a lot of money and time by installing this fan before water damage and mold becomes a problem in the bathroom. The damage caused by either can be quite extensive and expensive to repair.
Jim Corkern is a writer and promoter of quality
water damage restoration contractors and
Mold Remediation companies across the united states.
The purpose of the unit is to remove the steam from the bathroom so it does not become absorbed by the ceiling and walls in the bathroom and cause water damage. Mold growth is also a typical problem in the bathroom, so the exhaust fan will actually help you fight this second problem.
The quality of the fan is important. The quieter the fan’s operation, the higher the quality is. Some manufacturers do not put a noise rating on the packaging of the product, but most tend to do this to separate their high end exhaust fans from their basic ones. The other determining factor is how much air the exhaust fan will move per minute. The higher quality the fan, the more air it will remove from the room.
Ask yourself whether or not you want a light integrated into the fan unit. If so, then you might need a little bit of knowledge of how the electrical system in your house works. Purchasing a book on the subject is advised if you plan on installing the unit yourself.
If the fan is going to have a light in it, then it is a good idea to use the hole in your ceiling that should already exist from your original overhead light. If this does not exist or you want the fan separate from the light, you will create a hole with the jab saw. The electrical book you should have purchased should lay out the options on the kinds of switches you can use and how each one should be wired so you know you have continuity and that the wiring you install is correct.
After you are done wiring the fan, the exhaust duct kit will be installed next and this should come with instructions. This kit can be purchased at some hardware stores and home improvement stores.
Venting the air to the outside with the hose that came with the duct kit is not that difficult to do. Find the nearest soffit in your attic and cut a hole in it that follows the instructions that came with your duct kit. Attach the hose to it and you should be finished.
You will save a lot of money and time by installing this fan before water damage and mold becomes a problem in the bathroom. The damage caused by either can be quite extensive and expensive to repair.
Jim Corkern is a writer and promoter of quality
water damage restoration contractors and
Mold Remediation companies across the united states.
Standing Water, Water Damage, and Mold
Standing water inside of a home anywhere is a nuisance and most homeowners do not appreciate the liquid’s intrusion. It can happen almost anywhere, but most of the time the leaking of water into your house is completely preventable and the ability to repair it is always there.
Standing water not only causes water damage to the floor and walls, but it can also become a healthy breeding ground for mold. Stachybotrys atra is known for having a love of standing water and this is one of the last molds that you want growing in your house. While this mold is not as common as other genii of mold such as Cladosporium, Aspergillus, and Penicillium, it is not a rare one. It generally appears on items that have a high amount of cellulose content, such as dust, wood, paper on drywall, and etcetera. It requires almost constant moisture for days or weeks in order to start growing.
The health problems caused by Stachybotrys atra can be anything from coughing, runny noses, wheezing, and etcetera all the way to serious respiratory infections, rashes, and other serious health conditions.
Removing standing water from your home should be done as quickly as possible in order to prevent this mold growth and to prevent water damage. There are a few different causes of standing water.
If there is standing water in the basement after a heavy rain, then the cause could be that water is leaking into the basement through the foundation near the surface. This generally happens when water settles in around the base of the home in pockets because the soil is not piled high enough around the house. Water should not be allowed to settle around the house in this manner, so pile soil up around the foundation so that water runs down and away from it. Another good thing to do to keep this from happening is keeping your rain gutters cleared out as often as is necessary to keep them unclogged. Installing downspout extensions can also help run the water away from the home.
A cause of chronic standing water in the basement could be an underground spring leaking through the wall. There may not be much that you can do about this other than to have a drainage system installed. Do not assume that one type of drainage system fits all types of home constructions, because it does not. Talk to a contractor and find out what they recommend.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
Standing water not only causes water damage to the floor and walls, but it can also become a healthy breeding ground for mold. Stachybotrys atra is known for having a love of standing water and this is one of the last molds that you want growing in your house. While this mold is not as common as other genii of mold such as Cladosporium, Aspergillus, and Penicillium, it is not a rare one. It generally appears on items that have a high amount of cellulose content, such as dust, wood, paper on drywall, and etcetera. It requires almost constant moisture for days or weeks in order to start growing.
The health problems caused by Stachybotrys atra can be anything from coughing, runny noses, wheezing, and etcetera all the way to serious respiratory infections, rashes, and other serious health conditions.
Removing standing water from your home should be done as quickly as possible in order to prevent this mold growth and to prevent water damage. There are a few different causes of standing water.
If there is standing water in the basement after a heavy rain, then the cause could be that water is leaking into the basement through the foundation near the surface. This generally happens when water settles in around the base of the home in pockets because the soil is not piled high enough around the house. Water should not be allowed to settle around the house in this manner, so pile soil up around the foundation so that water runs down and away from it. Another good thing to do to keep this from happening is keeping your rain gutters cleared out as often as is necessary to keep them unclogged. Installing downspout extensions can also help run the water away from the home.
A cause of chronic standing water in the basement could be an underground spring leaking through the wall. There may not be much that you can do about this other than to have a drainage system installed. Do not assume that one type of drainage system fits all types of home constructions, because it does not. Talk to a contractor and find out what they recommend.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
Repairing Water Damaged Drywall
Water damaged ceilings can definitely be a safety hazard in your home, but not everyone has the money to hire a professional to repair or replace the section of drywall affected. It may just be a badly discolored piece of drywall or it could be that the tape between one section of drywall and another is sagging down. Even worse, the drywall could be weak in the middle and eventually collapse onto someone you care about. Something needs to be done about these water damaged areas of ceiling not only for structural purposes, but also for cosmetic ones, as well.
If the ceiling is only discolored badly with water stains, all you really should have to do is paint over it with primer first and then paint over that with the color of the rest of the ceiling. Your ceiling may be a traditional and ordinary white, but other colors will cover up the stains better, so consider this an opportunity to change the color of your ceiling. You will not have as much trouble covering up the stains with a paint that is not white.
No matter where the damaged piece of drywall is in your home, repairing it should be pretty easy. If it is the tape that is sagging down and coming apart from the drywall, all you need to do is remove the tape. Replace the tape and place joint compound over it. Smooth this out until the tape is not noticeable, paint over it with primer, then with the color of your ceiling.
If the drywall is sagging or cracked in the middle, then it needs to be completely replaced. You need to take out the entire damaged part of the drywall all the way to the joists, because the new piece of drywall needs something solid to hang onto or it will fall. It needs to be cut down the center of a joist in the ceiling so the new piece has something to rest on. Cut the new drywall to fit the part that you removed, screw it in with a drill, and tape over it the seam. Use joint compound over the tape and screws and smooth it out until the seams and screws are not noticeable anymore. Paint over it with primer the same way you would if you were only replacing the tape as mentioned earlier and then paint the color you desire back over it.
Jim Corkern is a writer and promoter of quality
South Carolina flood water damage restoration and other states such as
Connecticut water damage restoration companies across the united states.
If the ceiling is only discolored badly with water stains, all you really should have to do is paint over it with primer first and then paint over that with the color of the rest of the ceiling. Your ceiling may be a traditional and ordinary white, but other colors will cover up the stains better, so consider this an opportunity to change the color of your ceiling. You will not have as much trouble covering up the stains with a paint that is not white.
No matter where the damaged piece of drywall is in your home, repairing it should be pretty easy. If it is the tape that is sagging down and coming apart from the drywall, all you need to do is remove the tape. Replace the tape and place joint compound over it. Smooth this out until the tape is not noticeable, paint over it with primer, then with the color of your ceiling.
If the drywall is sagging or cracked in the middle, then it needs to be completely replaced. You need to take out the entire damaged part of the drywall all the way to the joists, because the new piece of drywall needs something solid to hang onto or it will fall. It needs to be cut down the center of a joist in the ceiling so the new piece has something to rest on. Cut the new drywall to fit the part that you removed, screw it in with a drill, and tape over it the seam. Use joint compound over the tape and screws and smooth it out until the seams and screws are not noticeable anymore. Paint over it with primer the same way you would if you were only replacing the tape as mentioned earlier and then paint the color you desire back over it.
Jim Corkern is a writer and promoter of quality
South Carolina flood water damage restoration and other states such as
Connecticut water damage restoration companies across the united states.
Repairing Tile Grout to Prevent Water Damage
Sometimes the tile on the floor and the walls in our bathrooms can become cracked over time and not only is it unattractive, but when we continue to get water on this tile, it seeps underneath it and damages the wooden floor holding it up. Repairing this damage to the wood underneath your tile can be expensive, since all the tile must be taken up in order to get to it. Repairing tile on your own is not a difficult job to do and if you do it correctly, you can even take up the tile later if it is not to your liking and replace the tile in the entire bathroom. Learning how to repair grout, however, is a first step.
Even if the tile itself is not cracked, sometimes grout will be missing, especially if the home is old. Grout comes in a few different types: sanded, unsanded, acrylic or epoxy. Depending on the type of tile you have in your bathroom, you will want to use one over the other. Sanded grout should not be used with marble tiles, since this will scratch the marble. Acrylic latex grout or unsanded grout should be used. The grout should be mixed according to the manufacturer’s instructions and the area you wish to replace needs to be cleaned out with a mixture of vinegar and water. A grout saw can be used to remove the rest of the damaged or loose grout. Do not chip the tile. The joints should be dampened with water and a paper towel used to remove water puddles in between the tiles. Fill in the joints with the grout completely and the joint’s surface should be smoothed out with a rounded stick. A damp sponge can be used to remove the excess.
The grout should be allowed to set firmly. The instructions on the package should tell you how long this should take. Since this is in a bathroom, a grout sealant should be applied after the grout completely dries.
After it dries and the grout sealant is in place, cleaning it with a damp rag is recommended. A cloudy haze should appear on the tile after it dries again and a dry towel can be used to remove this.
Replacing the grout in between the tile in your bathroom will help prevent water damage from occurring to the floor underneath and save you quite a bit of money in the long run. Hiring a professional is not always necessary and you can save money by learning how to do small home improvement projects like this yourself.
Jim Corkern is a writer and promoter of quality
north carolina flood water damage restoration and other states such as
New Jersey mold remediation companies across the united states.
Even if the tile itself is not cracked, sometimes grout will be missing, especially if the home is old. Grout comes in a few different types: sanded, unsanded, acrylic or epoxy. Depending on the type of tile you have in your bathroom, you will want to use one over the other. Sanded grout should not be used with marble tiles, since this will scratch the marble. Acrylic latex grout or unsanded grout should be used. The grout should be mixed according to the manufacturer’s instructions and the area you wish to replace needs to be cleaned out with a mixture of vinegar and water. A grout saw can be used to remove the rest of the damaged or loose grout. Do not chip the tile. The joints should be dampened with water and a paper towel used to remove water puddles in between the tiles. Fill in the joints with the grout completely and the joint’s surface should be smoothed out with a rounded stick. A damp sponge can be used to remove the excess.
The grout should be allowed to set firmly. The instructions on the package should tell you how long this should take. Since this is in a bathroom, a grout sealant should be applied after the grout completely dries.
After it dries and the grout sealant is in place, cleaning it with a damp rag is recommended. A cloudy haze should appear on the tile after it dries again and a dry towel can be used to remove this.
Replacing the grout in between the tile in your bathroom will help prevent water damage from occurring to the floor underneath and save you quite a bit of money in the long run. Hiring a professional is not always necessary and you can save money by learning how to do small home improvement projects like this yourself.
Jim Corkern is a writer and promoter of quality
north carolina flood water damage restoration and other states such as
New Jersey mold remediation companies across the united states.
Subscribe to:
Posts (Atom)
